I have a Kitttaz that I have been upgrading. I haven’t touched the electronics but have the Aerostruder, Taz 6 z-axis, combination Pro/Workhorse x-axis, and a generic magnet sheet and the Taz spring steel bed. I am ready to upgrade to a BL touch and E3D Revo hotend and extruder. Is there a profile for this already or should I look into building from scratch? I have some experience with editing Marlin and compiling the firmware but def not an expert.
I would use the fw tool and get as close as possible.
I have 3 taz 5 rail modded , revo hemera, bl touch, archem2. They all work great now. I did have to try a couple before i could find one that would upload.
I’m making good progress. I grabbed the most recent source and the configuration.h for a taz5 w bl and a workhorse with the h175. I compared the two and made the necessary changes. It compiled successfully and now I’m tuning and reassembling.
I have everything mostly working and am now tuning and working out minor details. One thing that is bugging me now is that the printer seems to time out and the jog buttons no longer respond. This also happens after a print. If I rehome the machine it works again for a while. Any one have a tip on where this can be disabled?