Gives the following error:
sudo ./build-firmware.sh -c ./config/examples/AlephObjects/custom/Oliveoil_TAZ6ArchimBLTouch/Angelfish_Aerostruder/Configuration.h
…
CXX src/gcode/bedlevel/G26.cpp
CXX src/gcode/bedlevel/G35.cpp
CXX src/gcode/bedlevel/G42.cpp
src/feature/runout.cpp:73:42: warning: unused parameter ‘extruder’ [-Wunused-parameter]
void event_filament_runout(const uint8_t extruder) {
^
CXX src/gcode/bedlevel/M420.cpp
CXX src/gcode/bedlevel/mbl/G29.cpp
CXX src/gcode/bedlevel/mbl/M421.cpp
CXX src/gcode/bedlevel/ubl/G29.cpp
CXX src/gcode/bedlevel/ubl/M421.cpp
CXX src/gcode/calibrate/G28.cpp
In file included from src/gcode/bedlevel/…/…/inc/MarlinConfigPre.h:37:0,
from src/gcode/bedlevel/…/…/inc/MarlinConfig.h:28,
from src/gcode/bedlevel/G26.cpp:98:
src/gcode/bedlevel/G26.cpp: In static member function ‘static void GcodeSuite::G26()’:
src/gcode/bedlevel/G26.cpp:513:35: error: ‘AutoPrintTimer’ was not declared in this scope
TERN_(START_PRINT_TIMER_ON_G26, AutoPrintTimer t);
^
src/gcode/bedlevel/…/…/inc/…/core/macros.h:558:26: note: in definition of macro ‘THIRD’
#define THIRD(a,b,c,…) c
^
src/gcode/bedlevel/…/…/inc/…/core/macros.h:204:29: note: in expansion of macro ‘___TERN’
#define __TERN(T,V…) ___TERN(_CAT(_NO,T),V) // Prepend ‘_NO’ to get ‘_NOT_0’ or ‘_NOT_1’
^
src/gcode/bedlevel/…/…/inc/…/core/macros.h:203:29: note: in expansion of macro ‘__TERN’
#define _TERN(E,V…) _TERN(CAT(T,E),V) // Prepend 'T’ to get ‘T_0’ or ‘T_1’
^
src/gcode/bedlevel/…/…/inc/…/core/macros.h:202:29: note: in expansion of macro ‘TERN’
#define TERN(O,A) TERN(ENA_1(O),A) // OPTION ? ‘A’ : ‘’
^
src/gcode/bedlevel/G26.cpp:513:3: note: in expansion of macro ‘TERN’
TERN(START_PRINT_TIMER_ON_G26, AutoPrintTimer t);
^
make: *** [Makefile:968: applet/src/gcode/bedlevel/G26.o] Error 1
make: *** Waiting for unfinished jobs…
|
|
./build-firmware.sh makes a few firmwares fine, but fails with the same error on:
Building for Hibiscus_Mini2 and AchemonSphinx_SmallLayer with board BOARD_EINSY_RETRO (1204)
I downloaded the prebuilt patreon firmware for now, but like to compile in my own mods, please advise… Thank you!